低頻相位測量系統設計計劃書路復雜，測頻精度不夠高；而采用方案二，用為簡單，而方案二雖然也可以精確控制移相，但是相12)角，當兩路信號的頻率相同時，相角差θ=φ1-φ2是一個與時間無關的常數b位數，對32位的計數結果進行浮點運算使得相位差測量的分辨率達到0.1o,其原理D/A儲器地址總線正弦波輸出相幅轉換的方式選用查表法，根據題目的要紅外鍵盤語音播報液晶顯示數字式移相信號發生器系統框圖值大小。因兩路正弦波產生的原理相同，僅僅是由賽題的要求，在三種不同的輸入頻率下，要求實現-45o~+45o的連續移相，且f。當頻率f移相電路矢量圖硬件模塊測試：系統本身由三個獨立的模塊的頻率、相位差以及峰-峰值進行設置。最后把產生的有相位差的兩路信號分別接入90o1.9%0.5%0.2%0.1%0.9%0.2%0.6%0.1%連續相移圍連續相移圍-46.78o~+43.12o-45.81o~+41.07o-44.11o~+42.56o峰-峰值圍輸入信號頻率設定相位差顯示相位差誤差設定幅值（V）實際幅值（V）誤差(%)9.83o44.85o90.42o271.31o359.02o1.71%0.33%0.46%0.19%0.11%0.05%0.25%1.35%1.47%0.25%1.31%2.61%9.10%0.0%1.10%9.10%1.31%2.61%6.25%1.31%2.61%6.25%0.63%1.85%設定相位差顯示相位差誤差（%）設定幅值（V）實際幅值（V）誤差（%）10o9.73o2.7%45o44.27o1.62%90o90.04o0.04%3.25%1.30%1.47%6.25%1.30%0.50%0.0%1.30%1.47%150o150.81o0.54%11.76%0.63%1.85%3.12%270o270.91o0.34%0.62%6.36%6.25%359o359.24o0.06%0.30%1.84%9.96o44.38o90.29o271.68o358.62o0.4%1.37%0.32%0.35%0.6%0.1%3.12%0.9%6.25%1.2%1.85%00.66%0.73%6.25%0.60%1.28%3.12%0.0%1.47%0.0%1.64%2.06%設定相位差顯示相位差9.96o誤差（%）0.4%設定幅值（V）5.5V實際幅值（V）6.25%1.64%1.85%45.82o1.82%3.13%05.76%6.25%90.64o0.7%0.10%2.04%00.19%1.31%7．80%9.10%270.41o0.15%1.64%3.77%3.13%358.85o0.04%3.30%3.38%可調，人機交互接口采用雙鍵盤（有線鍵盤＋紅［1］炳和.計算機控制系統基礎.北京：北京航天航空大學，2001.［3］彥斌等.凌陽十六位單片機