ICS53.100

CCSP97

團體標準

T/CCMA0198—2024

高原隧道電動工程機械用動力電池

電性能要求及實驗室試驗方法

Powerbatteryofelectricconstructionmachineryforplateautunnel

electricalperformancerequirementsandlaboratorytestmethods

2024?06?28發布2024?07?01實施

中國工程機械工業協會發布

中國標準出版社出版

T/CCMA0198—2024

目次

前言··························································································································Ⅲ

1范圍·······················································································································1

2規范性引用文件········································································································1

3術語和定義··············································································································1

4縮略語和符號···········································································································2

5要求·······················································································································3

6試驗方法·················································································································5

7檢驗規則···············································································································14

附錄A（資料性）電池單體測試記錄表············································································15

附錄B（資料性）電池包或系統測試記錄表······································································19

參考文獻····················································································································21

Ⅰ

T/CCMA0198—2024

前言

本文件按照GB/T1.1—2020《標準化工作導則第1部分：標準化文件的結構和起草規則》的規

定起草。

請注意本文件的某些內容可能涉及專利。本文件的發布機構不承擔識別專利的責任。

本文件由中國工程機械工業協會提出并歸口。

本文件由中國工程機械工業協會雙碳標準化技術委員會、中國工程機械工業協會雙碳工作委員會

組織制定。

本文件起草單位：江蘇徐工工程機械研究院有限公司、寧德時代新能源科技股份有限公司、中聯重

科股份有限公司、深圳市比亞迪鋰電池有限公司、雷沃重工集團有限公司、中機科（北京）車輛檢測工程

研究院有限公司。

本文件主要起草人：肖鵬輝、司發庫、劉延斌、賴慶、蒙小行、郭春華、范曉蘭、孫清心、陳光旭、余智勇、

敖志勇。

Ⅲ

T/CCMA0198—2024

高原隧道電動工程機械用動力電池

電性能要求及實驗室試驗方法

1范圍

本文件規定了高原隧道電動工程機械用動力電池單體、電池包或系統的電性能要求，描述了實驗

室試驗方法，確立了檢驗規則。

本文件適用于高原隧道電動工程機械用動力鋰離子電池的生產和檢驗，其他類型動力蓄電池可參

照執行。

2規范性引用文件

下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中，注日期的引用文

件，僅該日期對應的版本適用于本文件；不注日期的引用文件，其最新版本（包括所有的修改單）適用于

本文件。

GB/T21153—2007土方機械尺寸、性能和參數的單位與測量準確度

GB38031—2020電動汽車用動力蓄電池安全要求

3術語和定義

GB38031—2020界定的以及下列術語和定義適用于本文件。

3.1

高原隧道環境plateautunnelenvironment

滿足高原地區隧道以下條件的隧道施工環境：

——非爆炸性；

——環境溫度為-30℃~45℃；

——海拔為2000m~5000m；

——相對濕度小于或等于95%。

3.2

高原隧道電動工程機械plateautunnelelectricconstructionmachinery；PTECM

適應于在高原隧道環境（3.1）施工的電動液壓挖掘機、裝載機、鑿巖臺車等。

3.3

電池單體secondarycell

將化學能與電能進行相互轉換的基本單元裝置。

注：通常包括電極、隔膜、電解質、外殼和端子，并被設計成可充電。

[來源：GB38031—2020，3.1]

3.4

電池包b